From 77ff4428e0cb547f53c562bd9b850532116edcba Mon Sep 17 00:00:00 2001
From: Steven Murray <Steven.Murray@cern.ch>
Date: Thu, 19 Sep 2019 16:46:44 +0200
Subject: [PATCH] Put back unloading of MHVTL tape drives before testing starts
---
.../ctafrontend/cc7/opt/run/bin/init.sh | 34 +++++++++----------
1 file changed, 16 insertions(+), 18 deletions(-)
diff --git a/continuousintegration/docker/ctafrontend/cc7/opt/run/bin/init.sh b/continuousintegration/docker/ctafrontend/cc7/opt/run/bin/init.sh
index 4dcef3daac..c3a9de15a9 100755
--- a/continuousintegration/docker/ctafrontend/cc7/opt/run/bin/init.sh
+++ b/continuousintegration/docker/ctafrontend/cc7/opt/run/bin/init.sh
@@ -78,9 +78,8 @@ else
fi
-: <<'COMMENT_LABEL_PART'
if [ ! $LIBRARYTYPE == "mhvtl" ]; then
- echo "Real tapes, not labelling";
+ echo "Real tapes - do nothing";
else
# library management
# BEWARE STORAGE SLOTS START @1 and DRIVE SLOTS START @0!!
@@ -91,22 +90,21 @@ else
# normally, there is no need to rewind with virtual tapes...
mtx -f /dev/${LIBRARYDEVICE} unload $(echo ${unload} | sed -e 's/^.*-slot//') $(echo ${unload} | sed -e 's/drive//;s/-.*//') || echo "COULD NOT UNLOAD TAPE"
done
- echo "Labelling tapes using the first drive in ${LIBRARYNAME}: ${DRIVENAMES[${driveslot}]} on /dev/${DRIVEDEVICES[${driveslot}]}:"
- for ((i=0; i<${#TAPES[@]}; i++)); do
- vid=${TAPES[${i}]}
- tapeslot=$((${i}+1)) # tape slot is 1 for tape[0] and so on...
-
- echo -n "${vid} in slot ${tapeslot} "
- mtx -f /dev/${LIBRARYDEVICE} load ${tapeslot} ${driveslot}
- cd /tmp
- echo "VOL1${vid} CASTOR 3">label.file
- mt -f /dev/${DRIVEDEVICES[${driveslot}]} rewind
- dd if=label.file of=/dev/${DRIVEDEVICES[${driveslot}]} bs=80 count=1
- mt -f /dev/${DRIVEDEVICES[${driveslot}]} rewind
- mtx -f /dev/${LIBRARYDEVICE} unload ${tapeslot} ${driveslot}
- echo "OK"
- done
+# echo "Labelling tapes using the first drive in ${LIBRARYNAME}: ${DRIVENAMES[${driveslot}]} on /dev/${DRIVEDEVICES[${driveslot}]}:"
+# for ((i=0; i<${#TAPES[@]}; i++)); do
+# vid=${TAPES[${i}]}
+# tapeslot=$((${i}+1)) # tape slot is 1 for tape[0] and so on...
+#
+# echo -n "${vid} in slot ${tapeslot} "
+# mtx -f /dev/${LIBRARYDEVICE} load ${tapeslot} ${driveslot}
+# cd /tmp
+# echo "VOL1${vid} CASTOR 3">label.file
+# mt -f /dev/${DRIVEDEVICES[${driveslot}]} rewind
+# dd if=label.file of=/dev/${DRIVEDEVICES[${driveslot}]} bs=80 count=1
+# mt -f /dev/${DRIVEDEVICES[${driveslot}]} rewind
+# mtx -f /dev/${LIBRARYDEVICE} unload ${tapeslot} ${driveslot}
+# echo "OK"
+# done
fi
-COMMENT_LABEL_PART
echo "### INIT COMPLETED ###"
--
GitLab